PLEASE NOTE:  The bung for this sensor is bigger than the threaded holes found on most aftermarket and OEM intake manifolds!   Use the DTM version for most manifolds.

Use this sensor to input Intake Air Temperature IAT to your AEM ECU.    Kit Includes: Air Temp Sensor with 3/8" NPT Male Thread, High Performance GM-Style Connector, Aluminum Bung, Connector & Pins

30-2010 - Air Temp Sensor Kit

• Accuracy: < 1.5°C / 2.7°F
• Operating Temp: -40C to 135C / -40F to 275F
• Resistive Range (Ω): See Table
• Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
• Sensor Body Material: Brass
• Thread: 3/8" NPT
• Hex Size: 3/4"
• Installation Torque: 20Nm / 15 ft-lbs
• Weight: 33.3g
• Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals
• Includes: Air Temp Sensor, 3/8" NPT Alumium Bung, Mating Connector, Pins & Wire Seals